Brocade DCX 8510-4 Backbone Hardware Reference Manual - Manual (Page 62)

Chassis door removal and replacement
NOTE
The chassis door must be installed to ensure the Brocade DCX 8510-4 meets EMI and other
regulatory certifications.
Time and items required
The replacement procedure for the chassis door takes less than five minutes.
Removing a chassis door
Support the door to prevent it from falling. Pull and remove the door. It will pop off the ball studs.
FIGURE 19 Removal and replacement of the chassis door
Replacing a chassis door
Complete the following steps to reinstall the door.
1. Align the holes in the door with the ball studs on the chassis.
2. Push the door into place. It will snap onto the studs.
Chassis door removal and replacement
62 Brocade DCX 8510-4 Backbone Hardware Reference Manual
53-1002177-07