Port numbering template – Brocade DCX 8510-4 Backbone Hardware Reference Manual User Manual
Page 137
Port Numbering Template
Print or copy the following templates in this appendix and use them to document the port numbering
pattern for the Brocade DCX 8510-4. These templates show the following blades:
• CR16-4 core blade
• FC8-32E high density port blade
• FC8-48E high density port blade
• FC8-64 high density port blade
• FC16-32 high density port blade
• FC16-48 high density port blade
• FC16-64 high density port blade
• FS8-18 encryption blade
• FX8-24 extension blade
FIGURE 41 CR16-4 core blade
1. Port map
2. QSFP ports 4-7 (right to left)
3. QSFP ports 0-3 (right to left)
The following table shows the mappings from the numbered ports on the face of the core blade to the
port mappings as shown by the slotShow command. Each external port maps to four actual ports. The
CR16-4 core blade has external ports 0 through 7 only.
External port to slotShow port mapping for core blades
TABLE 29
External port number
slotShow port numbers
External port number
slotShow port numbers
0
0-3
8
32-35
1
4-7
9
36-39
2
8-11
10
40-43
3
12-15
11
44-47
4
16-19
12
48-51
5
20-23
13
52-55
6
24-27
14
56-59
7
28-31
15
60-63
Brocade DCX 8510-4 Backbone Hardware Reference Manual
137
53-1002177-07