Brocade DCX 8510-4 Backbone Hardware Reference Manual - Manual (Page 17)

FIGURE 3 Nonport side of the Brocade DCX 8510-4 (sample configuration)
1. WWN card bezel (logo plate)
2. Power supply
3. Blower assembly
4. Label with serial number and WWN
Brocade DCX 8510-4 blades
The following table summarizes the port, application, control processor, and core switch blades that are
available for the Brocade DCX 8510-4.
Blades available for the Brocade DCX 8510-4 TABLE 1
Description Name Function
Brocade DCX 8510-4
control processor
blade CP8 The CP8 blade contains the control plane for the chassis. There are two CP8
blades for redundancy. This control processor blade is compatible with the
Brocade DCX 8510-8, Brocade DCX 8510-4, Brocade DCX, and Brocade
DCX-4S.
Brocade DCX 8510-4 blades
Brocade DCX 8510-4 Backbone Hardware Reference Manual 17
53-1002177-07