Brocade DCX 8510-4 Backbone Hardware Reference Manual - Manual (Page 123)

DANGER
If the installation requires a different power cord than the one supplied with the device, make
sure you use a power cord displaying the mark of the safety agency that defines the regulations
for power cords in your country. The mark is your assurance that the power cord can be used
safely with the device.
Data transmission ranges
The following table provides the data transmission ranges for different transceivers, port speeds, and
cable types.
NOTE
There is no LWL or ELWL version of either the mSFP or QSFP transceiver.
Supported optics, speeds, cables, and distances TABLE 25
Transceiver
type Form
factor Speed Multimode
media (62.5
microns)
(OM1) Multimode
media (50
microns)
(OM2)
Multimode
media (50
microns)
(OM3)
Multimode
media (50
microns)
(OM4)
Single
Mode
Media (9
microns)
SWL mSFP/S
FP+ 2 Gbps 150 m (492
ft.) 300 m (984
ft.) 500 m (1640
ft.) N/A N/A
mSFP/S
FP+ 4 Gbps 70 m (229 ft.) 150 m (492
ft.) 380 m (1264
ft.) 400 m (1312
ft.) N/A
mSFP/S
FP+ 8 Gbps 21 m (68 ft.) 50 m (164 ft.) 150 m (492
ft.) 190 m (623
ft.) N/A
SFP+ 10 Gbps 33 m (108 ft.) 82 m (269 ft.) 300 m (984
ft.) 550 m (1804
ft.) N/A
mSFP/S
FP+ 16 Gbps 15 m (49 ft.) 35 m (115 ft.) 100 m (328ft.) 125 m (410
ft.)
N/A
QSFP 4 x 16-
Gbps N/A 50 m (164 ft.) N/A N/A N/A
LWL SFP+ 2 Gbps N/A N/A N/A N/A 30 km (18.6
mi.)
SFP+ 4 Gbps N/A N/A N/A N/A 30 km (18.6
mi.)
Data transmission ranges
Brocade DCX 8510-4 Backbone Hardware Reference Manual 123
53-1002177-07