Brocade DCX 8510-4 Backbone Hardware Reference Manual - Manual (Page 26)

3. Remove the Brocade DCX 8510-4 Port Side Exhaust Kit (if ordered), accessory kit, packing foam,
and antistatic plastic from the chassis and set aside.
4. Remove the chassis door from the Brocade DCX 8510-4.
5. Remove the vertical cable management fingers.
6. Use a lift to raise the chassis to the correct level. If installing the chassis in a cabinet, follow the
instructions provided by the rack kit manufacturer.
7. If applicable, lock the wheels of the lift.
8. Gently slide the chassis onto the final installation surface, ensuring that it remains supported during
the transfer.
9. Ensure that the chassis is oriented so that the nonport side has access to intake air (cool).
10.Reinstall the vertical cable management fingers.
11.Reinstall the door. The door must be installed to meet EMI compliance.
Items included with the Brocade DCX 8510-4
The Brocade DCX 8510-4 ships with the following:
• Brocade DCX 8510-4 chassis, populated with:
‐ Control processor blades (CP8)
‐ Core switch blades (CR16-4)
‐ Port blades, application blades, and encryption blades (included based on customer
specification)
‐ Blade slot filler panels (for slots not filled by blades)
‐ Port Side Exhaust Kit (included based on customer specification)
‐ WWN cards
‐ WWN bezel (logo plate)
‐ Power supplies
‐ Power supply filler panel (included if there is only one power supply)
‐ Blower assemblies
‐ Cable management finger assemblies
‐ Chassis door
• Accessory kit containing the following items:
‐ Brocade DCX 8510-4 Backbone QuickStart Guide
‐ ESD grounding strap
‐ USB device
‐ RS-232 serial cable. The RS-232 cable has an adapter at one end that can be removed to
provide an RJ-45 style connector.
• Rack mount kit (as ordered) with instructions
Order the Brocade-branded optical transceivers (SFP+, mSFP, and QSFP). The Brocade DCX 8510-4
supports SWL, LWL, and ELWL transceivers. The mSFPs and QSFPs are SWL transceivers only.
NOTE
For information about the SFP+, mSFP, and QSFP transceivers that are qualified for the Brocade DCX
8510-4, refer to
Transceiver removal and replacement on page 87.
Items included with the Brocade DCX 8510-4
26 Brocade DCX 8510-4 Backbone Hardware Reference Manual
53-1002177-07