Brocade DCX 8510-4 Backbone Hardware Reference Manual - Manual (Page 118)

Power demands per component TABLE 22
Blade or fan
units Maximum Power
Draw (Watts) Type of Blade Ports per blade Number of
blades
permitted in
chassis Total ports per
chassis
CP8 40 Control blade NA 2 NA
CR16-4 135 Core blade 8 64-Gbps QSFP
ports 2 16 quad ports
(64 ports)
FC8-32E 140 Port blade 32 8-Gbps SFP+ up to 4 128
FC8-48E 160.4 Port blade 48 8-Gbps SFP+ up to 4 192
FC8-64 126.4 Port blade 64 8-Gbps SFP+ up to 4 256
FC16-32 140 Port blade 32 16-Gbps SFP+-
can use 8 Gbps SFP
+ up to 4 128
FC16-48 160.4 Port blade 48 16-Gbps SFP+-
can use 8 Gbps SFP
+ up to 4 192
FC16-64 134 Port blade 16 QSFPs (4 16-
Gbps ports per
QSFP) up to 4 256
FS8-18 235 Encryption
blade 16 8-Gbps SFP+ up to 4 64
FX8-24 250 Extension
blade 12 8-Gbps SFP+
10 1-Gbps Ethernet
2 10-Gbps Ethernet
up to 4 48 8-Gbps
40 1-Gbps
Ethernet
8 10-Gbps
Ethernet
Fan unit 90 NA NA 2 fans per
chassis NA
Power supply redundancy is key to your installation, so any demand must be met with twice the
capacity. Refer to the following table for power supply requirements for specific demand ranges.
Power supply requirements TABLE 23
Demand Power supplies @ 110 VAC (nominal) Power supplies @ 220 VAC (nominal)
Up to 1000W 2 2
1000W-2000W NA - cannot achieve redundancy 2
Specifications
118 Brocade DCX 8510-4 Backbone Hardware Reference Manual
53-1002177-07