Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 103)

Road Layout
95
3. Tap ,QVHUW« . This will open the Edit
Segment dialog box. Enter the following
information to define the first segment, which
will be a 20-foot wide roadbed with a –2%
slope.
Segment Name: Roadbed
Horizontal Dist: 20
Slope: -2
4. Tap OK to return to the New Template screen
where the new roadbed segment will appear. A
list of segments is displayed. At this point,
only the roadbed and
<End> will be displayed
in the list. Whenever a new template it
inserted, it is inserted above the template that
is selected in this list. Therefore, to add a new
segment to the end of the last segment,
<End>
should be selected prior to tapping
,QVHUW«.