Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 123)

DTM Stakeout
115
Stake the DTM
12. With the information correctly entered in the Stake DTM screen,
tap
6ROYH to continue.
13. The DTM Shoot screen will open with a graphic that
shows the DTM boundary, the reference DTM
surface, the centerline, if used, the occupy point, and
backsight direction. Tap the
7DNH 6KRW« button to
take a shot.
14. If a shot is taken when the prism is located within
the boundary (if selected earlier) the graphic will
change and the
Data and Result cards will be filled
in. The graphic will show the current triangle in the
reference DTM surface where the rod is located and a
centerline and offset, if selected earlier.