Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 32)

User’s Manual
24
The ,QVWUXPHQW 6HWWLQJV« button accesses the settings that are
specific for the selected total station model. This screen can also
quickly be accessed from anywhere in the program by using the ,
,QVWUXPHQW Quick Pick.
Note: The options available after tapping the ,QVWUXPHQW 6HWWLQJV«
button, or the , ,QVWUXPHQW Quick Pick directly toggle settings that
are built into your particular total station. These settings are
explained in your total station’s documentation and are not explained
in the Survey Pro Manual.
The
6HQG WR ,QVWUXPHQW button is available when certain models are
selected. When this button is available, it should be tapped after
turning the total station on. This will send an initializing string to
the instrument that will make certain robotic functions work more
smoothly.
Units Settings
The Units Settings defines the units that are used within the
software, including those that are sent from the total station, entered
from the keypad and displayed on the screen. You can select the
following settings for your job.
Units for Distances : defines the units used for distances
as Meters , Feet , or International Feet .
Units for Angles : defines the units used for angles as
Degrees or Grads .
Display Directions As : will display directions as a
Bearing or Azimuth .
Azimuth Type : defines if you are using a North Azimuth
or a South Azimuth .