Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 83)

Fieldwork
75
current backsight), enter the correct instrument height in the Height
of Instrument field and tap  6HQG &LUFOH WR ,QVWUXPHQW . This would
update the Traverse / Side Shot screen and set the total station’s
horizontal angle to zero where you are then ready to collect more
data.
You have now created a job, checked the settings, setup a
backsight and collected data in the form of a side shot
and a traverse shot. If, at any time, you want to view the
coordinates of your points, you can do so from the
-RE ,
 (GLW 3RLQWV screen.
Data Collection Summary
1. Open or create a job.
2. Check the job settings.
3. Setup a backsight.
4. Collect data in the form of traverse shots or side shots.