Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 110)

User’s Manual
102
26. We now need to add a super elevation at the end of
the curve on the left side of the road to change the
slope back to -2%.
27. With <End> selected in the L eft column, tap the
$GG« button again.
28. From the Add Left Super Elevation screen we will
start the transition out of the super elevation, 200
feet from the beginning of the road so enter
2+00 in
the Start Station field.
29. The super elevation will return to the original slope
after 25 feet so enter
2+25 in the
(QG 6WDWLRQ field.
30. The start slope must be the same as the slope of the
road where it leads into the super elevation, so leave
the
Slope 1 field set to 8.
31. We want the ending slope to be -2% so in the Slope 2
field, enter
-2 . Leave the parabolic transition fields set to 0.
32. Be sure the Hinge on field is toggled to &HQWHU and
then tap OK to continue. This will complete the super elevation
entries for the left side of the road.