Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 42)

User’s Manual
34
General Settings
The General Settings contains the following settings:
;
Use Enter Key to Move Between Fields : when
checked, the [Enter] key will move the cursor to the next
field in all screens. When unchecked, the [Enter] key
will perform a different function depending on the field
selected.
Note: The arrow keys can also be used to move the
cursor between fields.
;
Allow Alphanumeric Point Names : when checked,
numeric or alpha character can be used for point names.
If unchecked, only numeric point names are valid.
;
Always Prompt for Backsight Check : when checked,
you will be prompted if you attempt to exit the Backsight
Setup screen without first performing a backsight check.
;
Beep When Storing Points : when checked, a beep will sound
whenever a new point is stored.
;
Beep On Control Activation : when checked, a beep occurs when
any button, checkbox, or other control is tapped.
;
Prompt for Description : when checked, a prompt for a description
will appear before any new point is stored from any routine other
than those included in the Survey and Stakeout menus.
; Prompt for Layer : when checked, a prompt to select a layer will
appear before any new point is stored from any routine other than
those included in the Survey and Stakeout menus.
;
Prompt for Attributes : when checked, a prompt to select feature
information will appear before any new point is stored from any
routine other than those included in the Survey and Stakeout menus.
This also requires that a feature file be selected from the Files
Settings card, described earlier.
;
Prompt to Backup When Closing Job : when checked, you will be
reminded to backup the current job prior to closing it.