Staking points – Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual User Manual
Page 86
User’s Manual
78
b.
In the
Occupy
Point
field, enter
1
as the point
name.
c.
Toggle the
%6 'LUHFWLRQ
/
%6 3RLQW
button to
%6 'LUHFWLRQ
and enter
0
as the backsight
azimuth.
d.
Enter an
HI
and
HR
of
5
feet.
e.
Leave the
Fixed HR at Backsight
field
unchecked.
f.
Confirm that the
Backsight Circle
value is zero.
If it displays a non-zero value, tap the
&LUFOH«
button and set it to zero.
g.
Tap
6ROYH . A map view will open that shows
a graphical representation of the occupy point
and backsight direction. Tap
&ORVH to continue.
Staking Points
4.
Stake the first design point (Point 2).
a.
Access the
6WDNHRXW , 6WDNH 3RLQWV
screen from
the Main Menu. The backsight information is
displayed near the bottom of the screen. At this
point, it is assumed that your total station is over
the occupy point and its horizontal angle was
zeroed while aiming toward the backsight.
b.
Enter the following data in the Stake Points
screen:
Design point
:
2
Increment
:
1
Height of rod
:
5
and tap
6ROYH ! .