Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual User Manual
Page 178
User’s Manual
170
7.
If a Compass Rule
adjustment is being
performed, the screen
shown here will open.
Select
Closed Traverse
if
you are adjusting a closed
traverse or select
Close to
Known Location
if you are
adjusting an open traverse
and closing to a known
point or location. A closing
location can be defined by
an existing point or known
coordinates by toggling the
3RLQW / /RFDWLRQ
button accordingly.
Note: if closing to a known location and a closing location is
not specified, it is automatically assumed that the first point of
the traverse will be the closing location.
8.
Tap
1H[W ! to open the final screen of the adjustment
wizard, which displays the changes that will be made by
the adjustment where they can be previewed before the
actual adjustment is applied.
The screen lists the adjustment details in three main
sections: the angle adjustment details; the compass rule
adjustment details, and the point details where the before-
and-after coordinates for each point are listed. An
example of the information provided in this screen is
shown here.
9.
If you are satisfied with the changes that will be made by
the adjustment routine, tap
$GMXVW to perform the
adjustment.