Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 91)

Fieldwork
83
7. Begin your survey. When you traverse to a new
point, the New Occupy Point dialog box will open
showing you the azimuth computed to the new
backsight point from the new occupy point. Once
you are setup over the new occupy point, and
aiming toward the new backsight point, press the
 6HQG &LUFOH WR ,QVWUXPHQW 
button to update the
Backsight Circle value and the horizontal angle on
the total station. Repeat this step after setting up
on each new traverse point.