Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 140)

User’s Manual
132
5. In the Sequence field, specify if you want to perform Direct Only
shots to each known point or Direct and Reverse shots.
6. Tap 6ROYH« after each field is correctly filled in. A
new screen will open where you can shoot a resection
point.
7. Enter the name of the point that you plan to shoot in
the
Resect Point field.
8. If you are shooting more than two resection points,
you have the option of taking
Distance and Angle
measurements with each shot or Angle Only
measurements by making the appropriate selection
from the
Option pull-down menu.
Note: The Angle Only option allows you to perform all
shots without the use of a prism, but the resulting
occupy point that is computed will not have an elevation
associated with it.
9. With this screen filled in correctly, aim toward the next resection
point and tap the
7DNH 6KRW« button to shoot the specified
resection point.
10. Repeat Steps 7 through 10 until every resection
point is shot. After the final shot is completed, the
Save Point screen will open where you can specify a
description for the new point.
11. Tap OK to return to the Resection screen. You can
tap the
Results tab to view information about the
stored point or the Map tap to see a graphical
representation of the resection.