Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 64)

User’s Manual
56
Creating an Alignment
In this step-by-step example, we will create an alignment
that has all the possible horizontal and vertical segment
types.
1. Select  -RE , (GLW $OLJQPHQWV from the Main Menu.
If any alignments exist in the current job, they will
be listed in this screen. An existing alignment can
then be edited or deleted, but for this example, we
will create a new alignment.
2. Tap 1HZ« to create a new alignment. This will
open the Edit Alignments screen where you can
begin adding horizontal and vertical segments.
3. Tap the POB tab and enter North , East and Elev
coordinates of 5000 , 5000 , 100 . This will be the
starting location of the horizontal and vertical
definition. (Alternatively, you could define the
starting location by tapping the
/RFDWLRQ / 3RLQW
button where 3RLQW is displayed and then select an
existing point.)