Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 161)

Screen Examples
153
Note: The boundary can have as many points as you desire, but the
selected points must begin with the starting point of the fixed line
that the hinge line intersect with and end with the hinge point.
6. Tap
6ROYH. The final boundary side will be
computed and the data can be viewed by using the
Results and Map tabs. If you selected to store a
point in Step 3, the computed point will also be
stored.
Parallel Method
The Parallel Method computes the location of one side of a four-sided
boundary where the computed side is parallel to a stationary side of
the boundary.
Using the same lot as we used above, we will compute the location of
a line in a 1/3-acre boundary that is parallel to line 2-3 and intersects
with a line that runs north from Point 2 and Line 3-4 as shown here.
3 2
?
4