Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 107)

Road Layout
99
8. With <End> selected in the L eft column, tap the
$GG« button. This opens the Add Left Template
screen, which allows you to add a template to the
left side of the road.
9. All the available templates will be displayed in the
Template column. Select the T1 template, created
earlier.
10. Since we will use this template for both sides of the
road, check the
;
Mirror to Right checkbox and tap
OK to return to the New Road screen. We now
have the minimum number of components to
completely define a road: an alignment, and a left
and right template.
11. Tap &KHFN« to confirm that the road is okay. You
should get a message stating success.
Note: Once templates have been added, you can return
to the Road card and tap the
9LHZ 3URILOHV« button to
view the cross-sectional profile of the road at any
station.