Fire-Lite MRP-2002C Agent Release Control Panel - Manual (Page 53)

MRP-2002 Series Instruction Manual — P/N 53049:E2 3/7/2013 53
Master Programming Level Programming
3.5.1 FACP CONFIG (Application Templates)
For a detailed description of each Template, refer to “FACP Configuration Templates” on
page 118. The FACP Configuration option allows the user to program the FACP with 1 of 13
factory preprogrammed templates or one custom template which can be programmed by the user.
The templates have been provided to allow the user to quickly program the panel with typical job-
site configurations. The user may choose to select one of the templates or bypass this option,
proceeding to the next sections which detail customized programming of the FACP.
A factory template may be chosen and later changed to better fit a site requirement. The changed
template can be saved as the one custom template.
PROGRAMMING
1=CROSS INPUT ZONES
2=ON-BOARD RELAYS
3=SYSTEM SETUP
PROGRAMMING
1=ANN-BUS
2=HISTORY 256 EVENTS
3=WALKTEST
Programming Screen #2
Programming Screen #3
PROGRAMMING
1=CLEAR PROGRAM
2=PASSWORD CHANGE
Programming Screen #4
PROGRAMMING
1=FACP CONFIG USER
2=INPUT ZONES
3=OUTPUT CIRCUITS
Programming Screen #1