Fire-Lite MRP-2002C Agent Release Control Panel - Manual (Page 54)

54 MRP-2002 Series Instruction Manual — P/N 53049:E2 3/7/2013
Programming Master Programming Level
Pressing 1, while viewing Programming Screen #1, will select the FACP Config option and display
the following screen:
Press the down arrow key to view all available templates. During initialization of the panel
following power-up or reset, the selected Template will be displayed by the LCD.
To select a pre-programmed template, press the number key corresponding to the desired template.
Note that the factory templates may pre-set most programmable features of the FACP.
3.5.2 Input Zones
The Input Zones option allows the user to initially program or change the programming for the six
input zones (circuits). Pressing 2, while viewing Programming Screen #1, will select the Input
Zones option and display a screen similar to the following:
Pressing the down arrow key will display additional screens for Input Zones 4 through 6. To
program a specific zone, press the number key corresponding to the desired zone while viewing one
of the Input Zone screens.
To program Input Zone 1, press the 1 key while viewing Input Zone Screen #1. The following
screens will be displayed:
To change the programming for the displayed zone, press the keyboard ‘down’ arrow key to view
the Edit Zone screens.
FACP CONFIG
1=TEMPLATE 1
2=TEMPLATE 2
3=TEMPLATE 3
FACP Config Screen #1
NOTE: Template 1 through Template 13 as well as the Custom Template are available for the
MRP-2002/E Agent Release Control Panel.
INPUT ZONES
1=ZONE 1
2=ZONE 2
3=ZONE 3
Input Zone Screen #1
INPUT ZONE 1
NORMAL 2-WIRE SMOKE
PRESS TO EDIT
Edit Input Zone Screen #1