Fire-Lite SLC Intelligent Control Panel Wiring Manual - Manual (Page 57)

FireLite SLC Wiring Manual — P/N 51309:P1 10/12/2011 57
Installation and Wiring Intelligent Detector Bases
9.2.2 Wiring a Detector Base
Typical wiring of a detector base (B501 shown) connected to an SLC is shown in the figure below.
An optional RA100Z/RA400Z Remote LED Annunciator is shown connected to the detector.
+ –
+ –
–
+
S
LC-
B5
01
2w
ire
.w
m
f
RA100Z /
RA400Z
Remote LED
Annunciator
(Optional)
To Next Device
on SLC
From Control Panel SLC
Figure 9.1 Wiring a B210LP or B501 Detector Base
NOTE: The B210LP base wiring is identical to the B501. B501 is the flangeless model.