1 reference documentation, Reference documentation – Fire-Lite SLC Intelligent Control Panel Wiring Manual User Manual

Page 9

Advertising
background image

FireLite SLC Wiring Manual — P/N 51309:P1 10/12/2011

9

Scope

Introduction

Currently, there are two styles of detector bases available, legacy version and newer version. The
obvious difference between the two styles is the orientation of the screw terminals. Refer to
Section 9 and Appendix D for an illustration of each.

1.1.1 Reference Documentation

The table below accommodates a list of document sources containing additional information
regarding the devices used on a Signaling Line Circuit:

NOTE: Only the B501 Detector Base, B210LP Detector Base (replacement base for B350LP),
B224RB Relay Base, and B224BI Isolator Base are available as newer type bases. Both the
legacy and newer versions share the same part numbers. The newer version bases will be
phased in, replacing the legacy version. This manual contains information and wiring diagrams for
the newer version of the bases. Refer to “Intelligent Detector Base Layouts for Legacy Devices”
on page 71 for
additional information.

For information on...

Refer to...

Part Number

MS-9200/MS-9200E

Instruction Manual

51003

MS-9600/MS-9600E

Instruction Manual

51335

MS-9200UD/MS-9200UDE

Instruction Manual

51906

MS-9200UDLS/MS-9200UDLSE/MS-9200UDLSC

Instruction Manual

52750

MS-9600LS/MS-9600LS(C/E) & MS-9600UDLS/MS9600UDLSE

Instruction Manual

52646

MS-9050UD/MS-9050UDC/MS-9050UDE

Instruction Manual

52413

Compatible Devices

Device Compatibility Document

15384

BG-12LX Pull Station

Installation Instructions

I56-3655

MMF-300 Monitor Module

Installation Instructions

I56-1191 / I56-3653

MMF-300-10 Monitor Module

Installation Instructions

I56-1873

MMF-301 Mini Monitor Module

Installation Instructions

I56-1193 / I56-3654

MMF-302 Monitor Module

Installation Instructions

I56-1192 / I56-3652

MMF-302-6 Interface Module

Installation Instructions

I56-1900

MDF-300 Dual Monitor Module

Installation Instructions

I56-0013 / I56-3665

CMF-300 Control Module

Installation Instructions

I56-1189 / I56-3650

CMF-300-6 Control Module

Installation Instructions

I56-1874

CRF-300 Relay Module

Installation Instructions

I56-1190 / I56-3651

CRF-300-6 Relay Module

Installation Instructions

I56-1875

CDRM-300 Multiple Input/Output Module

Installation Instructions

I56-3726

I300 Isolator Module

Installation Instructions

I56-1381

AD350 Multicriteria Detector

Installation Instructions

F300-17-00

AD355 Multicriteria Detector

Installation Instructions

I56-3660

SD350 & SD350T Photo Detector

Installation Instructions

I56-0035

SD355 & SD355T Photo Detector

Installation Instructions

I56-3660

CP350 Ionization Detector

Installation Instructions

I56-0036

CP355 Ionization Detector

Installation Instructions

I56-3656

H350 Heat Detector

Installation Instructions

I56-0038

H350R Heat Detector w/ROR

Installation Instructions

I56-0037

H355 Heat Detector (135

°)

Installation Instructions

I56-3657

H355R Heat Detector w/ROR

Installation Instructions

I56-3657

H355HT Heat Detector (190

°)

Installation Instructions

I56-3657

D350P Duct Detector

Installation Instructions

F300-10-00

D350PL(A) Duct Detector - low flow

Installation Instructions

I56-1975

D350RP Duct Detector w/Relay

Installation Instructions

I56-0047

D350RPL(A) Duct Detector w/Relay - low flow

Installation Instructions

I56-1974

D355PL Duct Detector - low flow

Installation Instructions

I56-3255

Advertising