3 survey initiation – KYORITSU 6305 Instruction Manual User Manual
Page 106
8.9
KEW6305
8-3 Survey initiation
There are two methods to start a survey.
(1) Manual operation
Pressing the
START/STOP
key on
DEMAND
range for at least 2 sec. starts measurement.
(2) Automatic operation (preset time and date)
Set the start time and date on
SET UP
range, and then press the
START/STOP
key on
DEMAND
range. The instrument goes into stand-by mode, and the measurement starts at the
preset time and date.
● To start measurement manually
1
Press the
START/STOP
key on
DEMAND
range at least 2 sec.
2
File number screen is displayed for about 1 sec. (a file is opened), and then the measurement
screen is displayed. After that, measurement starts. At this time, LED status indicator is on
(GREEN).
File number screen
(displayed for about 1 sec.)
Measurement screen
LED status indicator
is on.