KYORITSU 6305 Instruction Manual - Manual (Page 34)

4.7
KEW6305
1 5 0 V 3 0 0 V 6 0 0 V 1 P2 W 1 P3 W 3 P3 W 3 P4 W
5 A 1 0 A 2 0 A 5 0 A 1 0 0 A 2 0 0 A 5 0 0 A 1 0 0 0 A
“Setting 05” VT ratio
For the detailed information about VT ratio, please refer to “5-3 VT/CT ratio” in this manual.
Setting range 0.01 - 9999.99
(can be set by 0.01)
Default value (or after system reset) 1.00
1 Use the Cursor key on the selection screen, and select “Setting 05”.
2 Press the ENTER key to get the instrument into setting change mode.
3 The rightmost digit of previous setting (or default value: 1.00) blinks. Change number with the Cursor
key, and then press the ENTER key after making necessary change.
Function of
Cursor keys:
To select the digit subject to change.
To change the value of selected digit.
When VT ratio is set to other than 1, “ “ mark appears on the LCD.
NOTE
* When 0 is set as a VT ratio, it is forcefully changed to 1.