KYORITSU 6305 Instruction Manual - Manual (Page 19)

KEW6305
2.4
< Symbols indicate the functions or status during measurement >
Symbols Functions and status during measurement
Lights up when the keys are locked.
Lights up when voltage exceeds a certain condition.
Lights up when current exceeds a certain condition.
Lights up when instruments is working by AC power supply.
Lights up when instruments is working by batteries.
Lights up when data hold function is activated.
Lights up when selecting SET UP Range.
Lights up when selecting WIRING CHECK Range.
Blinks while instantaneous values are being displayed on the LCD.
Blinks while integration values are being displayed on the LCD.
Blinks while demand values are being displayed on the LCD.
When the capacity of SD card or internal memory is exceeded.
Lights up when selecting DATA CHECK Range.
Lights up while data can be saved in the SD card, and blinks while
saving data.
Lights up while a USB cord is connected to the terminal, and blinks
during data communication.
Lights up while using Bluetooth communication.
Lights up while data can be saved in the internal memory, and blinks
while accessing to the memory.
Lights up when VT ratio is set to other than “1”.
Lights up when CT ratio is set to other than “1”.