KYORITSU 6305 Instruction Manual - Manual (Page 46)

4.19
KEW6305
“Setting 17” Demand warning cycle
The buzzer will sound when a predicted demand value exceeds a target demand value during
demand measurement.
For further details, please refer to “Section 8”: Demand measurement.
According to the demand measurement interval, which has been set at Setting 16, warning cycle can
be set to as follows.
Demand measurement cycle
“Setting 16”
Warning cycle
10 / 15 min. 1 / 2 / 5 min.
30 min.
1 / 2 / 5 / 10 / 15
min.
Default value (or after system reset) 10 min.
1 Use the Cursor key on the selection screen, and select “Setting 17”.
2 Press the ENTER key to get the instrument into setting change mode.
3 Previous setting (or default value: 10 min.) blinks. Press the Cursor key to select any desired time,
and then press the ENTER key after making necessary change.