KYORITSU 6305 Instruction Manual - Manual (Page 137)

KEW6305 13.8
< MODEL8125 > < MODEL8124 > < KEW8129 >
AC 500Arms (707Apeak) AC 1000Arms (1414Apeak) AC 300/1000/3000 Arms
AC0 ~ 500mV
(AC500mV/500A) : AC 1mV/A
AC0 ~ 500mV
(AC500mV/1000A) : 0.5mV/A
300A Range : AC500mV/AC300A(1.67mV/A)
1000A Range : AC500mV/AC1000A(0.5mV/A)
3000A Range :
AC500mV/AC3000A(0.167mV/A)
AC0 ~ 500Arms AC0 ~ 1000Arms
300A Range :
30 ~ 300Arms (424Apeak)
1000A Range
100 ~ 1000Arms (1414Apeak)
3000A Range :
300 ~ 3000Arms(4243Apeak)
±0.5%rdg±0.1mV (50/60Hz)
±1.0%rdg±0.2mV (40Hz ~ 1kHz)
±0.5%rdg±0.2mV (50/60Hz)
±1.5%rdg±0.4mV (40Hz ~ 1kHz)
±1.0%rdg (45 ~ 65Hz)
(at the center of sensor)
within ±1.0°
(5 ~ 500A/ 45 ~ 65Hz)
within ±1.0°
(10 ~ 1000A/ 45 ~ 65Hz)
within ±1.0º
(within the measuring range of each
Range at frequency of 45 ~ 65Hz)
23±5°C, relative humidity 85% or less (no condensation)
0 ~ 50°C, relative humidity 85% or less (no condensation)
-20 ~ 60°C, relative humidity 85% or less (no condensation)
AC500Arms (50/60Hz) AC1000Arms (50/60Hz) AC3600Arms (50/60Hz)
approx 2Ω approx 1Ω approx 100Ω or less
indoor use, altitude 2000m or less
IEC 61010-1, IEC 61010-2-032
Measurement CAT.III (600V), Pollution degree 2
IEC61326
AC5350V/ 5 sec
between Jaws – enclosure, enclosure – output terminal,
Jaws – output terminal
AC5350V/ 5 sec
between circuit – sensor
50MΩ or more/ 1000V
between Jaws – enclosure, enclosure – output terminal, Jaws –
output terminal
50MΩ or more/ 1000V
between circuit – sensor
Φ40mm Φ68mm Φ150mm
128(L) × 81(W) × 36(D)mm 186(L) × 129(W) × 53(D)mm
111(L) × 61(W)× 4 3(D)mm
(protrusions are not included)
approx 3m
Sensor part : approx 2m
Output cable : approx 1m
MINI DIN 6PIN
approx 260g approx 510g
8129-1 : approx410g
8129-2 : approx680g
8129-3 : approx950g
Instruction manual, Cable marker
Instruction manual, Output cable (M-7199)
Carrying case
7146 (Φ4 Banana plug), 7185 (Extension lead)