KYORITSU 6305 Instruction Manual - Manual (Page 27)

KEW6305 3.6
Error number (001 - 063）
3.3.2 Error message
This instrument automatically checks the internal circuit immediately after it is turned on.
When a failure in the internal circuit is suspected, the error screen below will be displayed for about
2 sec. prior to the start-up screen.
In case that following screen appears, stop using the instrument immediately and refer to “Section12:
When defect or breakdown is suspected
” in this manual.
CAUTION
Measurement can be done if the error screen appeared when powering on the instrument. However, the
accuracy of the measured value may out of the specification.
Error No.
～