KYORITSU 6305 Instruction Manual User Manual
Page 39
KEW6305
4.12
“Setting 10” Specific time period rec. or endless rec.
1 Use the
Cursor
key on the selection screen, and select “Setting 10”.
2 Press the
ENTER
key to get the instrument into setting change mode.
3 Present setting (or default value: OFF) blinks. Press the
Cursor
key to select “ON” or “OFF”.
ON
: Specify the recording start / stop time (repeatedly recorded).
OFF : Record the data continuously.
4 Press the
ENTER
key after making necessary change.
NOTE:
* Setting screens for Setting 11 to 14 may not be displayed according to the setting done at Setting
10.
- When Setting 10 has been set to “ON”, setting screens for Setting 11 and 12 will be displayed but
for Setting 13 and 14 will not be displayed.
- When Setting 10 has been set to “OFF”, setting screens for Setting 13 and 14 will be displayed but
for Setting 11 and 12 will not be displayed.