KYORITSU 6305 Instruction Manual - Manual (Page 113)

KEW6305
8.16
8-7 Displayed Digits/ Over-range indication
●Digits
*Predicted demand value (Guess), Present demand value (Present): max 6 digits
The digits of the predicted and present demand values are corresponding to the target demand values
listed in the table below.
Target demand value
(“Setting 16”)
Digit and decimal point
0.1～999.9 W／VA 0.0～99999.9 W／VA
0.1～999.9 kW／kVA 0.0～99999.9 kW／kVA
0.1～999.9 MW／MVA 0.0～99999.9 MW／MVA
0.1～999.9 GW／GVA 0.0～99999.9 GW／GVA
* Load factor (%):max 6 digits 9999.99%
● Over-range indication/ others
When the predicted demand value, present demand value(max demand value) and load factor exceed
99999.9, segment becomes “
”.
* When the input voltage and the current exceeds the max display counts, or mark is
displayed on the LCD. In this case, accurate measurement cannot be made.
* On the W range, when the P (active power) is shown by bars “- - - -”, this means that the increment
in electrical energy is insignificant.
Refer to “6-5-2 Over-range indication/ Bar indication” in this manual.