A&D A & D Analytical Balance GH-120/GH-200/GH-300/GH-202/GH-252 - Manual (Page 43)

41
L A B - 0 1 2 3 CR LF
2 0 0 4 / 0 7 / 0 1 CR LF
CR LF 1 2 : 3 4 : 5 6
CSV format 5if type 5
This format separates the data of A&D standard format and the unit by a comma ( , ).
This format outputs the unit even when the data is overloaded.
When a comma ( , ) is selected for the decimal point, the separators are set to semicolon ( ; ).
When the ID number, data number, time and date are added at "Data output (
dout )" of the
function table, outputs ID number, data number, date, time and weighing data in this order
and separates each item by a comma and treats all the items as one group of data.
ID number dout 5-id 1
The number to identify a specific balance.
This format consists of eight characters excluding the terminator.
Data number dout d-no 1
This format outputs the data number just before the data is transmitted using the RS-232C
interface.
This format consists of six characters excluding the terminator.
When CSV format (
5if type 5 ) is selected, the period ( . ) is replaced with a comma ( , ).
Date dout 5-td 2 or 3
The date output order can be changed in " Time/Date output (5-td)" and "Clock ( Cl adj )".
The year is output in a four-digit format.
Time dout 5-td 1 or 3
This format outputs time in 24-hour format.
Data number Terminator
LAB-0123, No,012, 2004/07/01, 12:34:56, ST,+0000.1278,~~g<CR><LF>
CR LF
S T , + 0 0 0 . 1 2 7 8 , g CR LF
O L , + 9 9 9 9 9 9 9 E + 1 9 , g
ID number Data number Date Time Weighing data