Storing the weighing data, Caution – A&D A & D Analytical Balance GH-120/GH-200/GH-300/GH-202/GH-252 User Manual
Page 55
53
12.2.
Data Memory for Weighing Data
The balance can store 200 sets of weighing data in memory (if time and date are added, the
balance can store 100 sets). Even if the AC adapter is removed, the data is maintained in
non-volatile memory.
It is not necessary to connect the printer or personal computer to the balance continually,
because the balance stores the weighing data in memory.
The data in memory can be output at one time to a printer or personal computer.
The data in memory can be displayed on the balance for confirmation.
Data (ID number, data number, time and date) to be added to the output data can be
selected in the function setting.
Storing the weighing data
Note If
"
Clr
" blinks in the upper left of the display, delete the data in memory.
1 Set the "Data memory (
data
)" parameter to "
1
".
2 Specify the "Time/Date output (
5-td
)" parameter whether time and date is to added or not.
3 The storing mode depends on the "Data output mode (
prt
)" parameter setting.
Four types of storing modes are available to store data.
Key
mode........................ When the
key is pressed and the displayed value is
stable, the balance stores the weighing data.
Auto print modes A ......... When the displayed value is stable and the conditions of "Auto
print polarity", "Auto print difference" and zero point (reference
value) are met, the balance stores the weighing data.
Auto print modes B ......... When the displayed value is stable and the conditions of "Auto
print polarity", "Auto print difference" and last stable data
(reference value) are met, the balance stores the weighing data.
Interval memory mode.... Weighing data is stored at an interval specified in "Interval time
(
int
)". Press the
key to start and stop this mode.
Caution
When weighing data is being stored in memory, the data can not be output to a personal
computer using the RS-232C interface.
"
fUl
" indicates that memory is full or the memory capacity has been reached. More data can
not be stored unless the memory data is deleted.
Interval memory
standby indicator
Interval memory
active indicator
The data amount
in memory
Memory full
Data number of the data
currently displayed
Weighing data
being displayed
Memory data
being displayed