A&D A & D Analytical Balance GH-120/GH-200/GH-300/GH-202/GH-252 - Manual (Page 71)

69
Setting a negative target value and filling with a sample until
the display becomes zero
This example uses " erCd 1 " of " 5if " so that the <AK> (06h) code is output.
Computer Time Balance
R command
PT: command to set a target weight of 10 g
Place a container
Before command
execution
Command received
In process
Command completed
Zero display
Command received
Target weight display
Fill with sample until
the display becomes
zero