A&D A & D Analytical Balance GH-120/GH-200/GH-300/GH-202/GH-252 - Manual (Page 49)

47
11.2.
GLP Report
Set the following parameters to output the report.
Refer to "15.2. Connection to peripheral equipment" for connection to an AD-8121B.
To print the report, set the "GLP output (
info )" parameter to " 1 " and use MODE 3 of the
AD-8121B. If MODE1 is used, select temporary dump print mode by pressing the STAT.
key of the AD-8121B.
To output the report to a personal computer using the RS-232C interface, set the "GLP
output ( info )" parameter to " 2 ".
If the time and date are not correct set the correct time and date in "Clock ( Cl adj )" of the
function table.
Calibration report using the internal mass
Key operation
1 Press
the CAL key to display Cal in and calibrate the balance automatically.
2 If GLP output is used, glp is displayed and the calibration report is output.
3 The balance returns to weighing mode after this calibration.
Setting of "info 1" Setting of "info 2"
AD-8121 printer format General format
Space, ASCII 20h
<TERM> Terminator, CR , LF or CR
CR Carriage return, ASCII 0Dh
LF Line feed, ASCII 0Ah
Manufacturer
Model
Serial number
ID number
Date
Time
Calibration type
Signature
=========== A = & = D
MODEL ===== GH-300
S/N ===== 01234567
ID ====== LAB-0123
DATE == 2004/07/01
TIME ==== 12:34:56
CALIBRATED(INT.)
SIGNATURE
-
- - - - - - - - - - - - - -