Title block and end block – A&D A & D Analytical Balance GH-120/GH-200/GH-300/GH-202/GH-252 User Manual
Page 53
51
-----------
A
-
&
-
D
MODEL
-----
GH-300
S/N
-----
01234567
ID
------
LAB-0123
DATE
--
2004/07/01
START
TIME
----
12:34:56
WT
--
+123.4567
--
g
WT
--
+123.4612
--
g
WT
--
+123.4623
--
g
WT
--
+123.4634
--
g
WT
--
+123.4511
--
g
WT
--
+123.4534
--
g
WT
--
+123.4712
--
g
WT
--
+123.4645
--
g
END
TIME
----
12:40:15
SIGNATURE
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Title block and end block
When mass values are recorded as GLP data, a "Title block" is inserted at the beginning and
an "End block" is inserted at the end of a group of mass values in the GLP report.
Notes
To output the report to an AD-8121B , use MODE 3 of the AD-8121B. If MODE1 is used,
select temporary dump print mode by pressing the
STAT.
key of the AD-8121B.
If the data memory function is used (except
data 0
), the "Title block" and "End block" can not
be output.
Key operation
1 With the weighing data displayed, press and hold the
key, then release the key.
5tart
is displayed. The "Title block" is output.
2 The weighing data is output according to the parameter setting of the data output mode (
prt
)
of the function table.
3 Press and hold the
key until
recend
is displayed, then release the key.
The "End block" is output.
Setting of "info 1"
Setting of "info 2"
AD-8121 printer format
General format
Space, ASCII 20h
<TERM>
Terminator, CR , LF or CR
CR
Carriage return, ASCII 0Dh
LF
Line feed, ASCII 0Ah
Title block
Manufacturer
Model
Serial number
ID number
Date
Time
Weighing data
Time
Signature
End block