HP LaserJet 3055 - Manual (Page 164)

Scanning to a software program
To scan to a software program, you scan an item using the program itself. Any TWAIN-compliant
program can scan an image. If the program that you are using is not TWAIN-compliant, you can save
the scanned image to a file and then place, open, or import the file in the software program. For more
information, see
Scanning by using other software .
Using page-by-page scanning
NOTE For best results, load originals in the automatic document feeder (ADF) input tray, not
the flatbed scanner (on the HP LaserJet 3052/3055/3390/3392 all-in-one).
1. Load the originals that are to be scanned face-up in the ADF input tray. Adjust the media guides
to hold the originals in place.
2. If the all-in-one is connected directly to your computer, the HP Director opens after you insert an
item into the automatic document feeder ADF input tray. If the HP Director does not
automatically open, click the HP Director icon in the dock.
3. To open the HP LaserJet Scan dialog box, click the Scan button in the HP Director.
4. Specify an image type.
5. Click Scan First.
6. After the scan process has finished, click Scan Next.
7. Repeat step 6 for each page of the original.
8. After all of the pages have been scanned, click Send....
-or-
Click the Save As icon to save the pages to a file.
Canceling a scan job
To cancel a scan job, use one of the following procedures.
● On the all-in-one control panel, press Cancel .
● Click the Cancel button in the onscreen dialog box.
If you cancel a scan job, remove the original from the flatbed scanner or from the automatic
document feeder (ADF) input tray.
NOTE These procedures vary with Macintosh operating systems.
146 Chapter 8 Scan ENWW