HP LaserJet 3055 - Manual (Page 38)

Software for Windows
When you install the software for Windows, you can directly connect the all-in-one to a computer by
using a USB cable, or you can connect the all-in-one to the network by using the internal print server.
See the getting started guide for installation instructions, and see the Readme file for the latest
software information.
The following software is available to all all-in-one users, whether you connect the all-in-one directly
to a computer by using a USB cable or to the network by using a print server.
Software components for Windows
HP ToolboxFX
You must perform a typical installation to use HP ToolboxFX.
HP ToolboxFX provides links to all-in-one status information and help information, such as this user
guide, and tools for diagnosing and solving problems. See
HP ToolboxFX for more information.
Embedded Web server (EWS)
The EWS is a Web-based interface that provides simple access to all-in-one status and
configurations, including network configurations and Smart Printing Supplies (SPS) functionality.
You can gain access to the EWS through the network connection to the all-in-one. Type the all-in-
one IP address in a Web browser to open the all-in-one EWS homepage. From the homepage, you
can use the tabs and left navigation menu to check the status of the all-in-one, configure the all-in-
one, or check the status of the supplies.
Supported browsers include:
● Internet Explorer 5.0 or later
● Netscape Navigator 4.75 or later
● Opera 6.05 or later
● Safari 1.2 or later
Using Add or Remove Programs to uninstall
Use the Add or Remove Programs method in Windows to remove the all-in-one software. This
method does not require you to have the software CD.
1. Click Start, point to Settings, and click Control Panel.
● In Windows XP, click Start, and then click Control Panel
2. Double-click Add or Remove Programs.
3. Scroll through the list of software programs and click HP LaserJet 3390/3392 all-in-one.
4. Click Remove.
20 Chapter 2 Software ENWW