HP LaserJet 3055 - Manual (Page 196)

3. Enter TCP/IP configuration values for the computer:
● Windows 2000—On the General tab in the Local Area Connection Properties window,
select Internet Protocol (TCP/IP) and click Properties.
● NT 4.0—You may be automatically prompted for TCP/IP configuration values. If not, select
the Protocols tab in the Networks window and select TCP/IP Protocol. Then click
Properties.
If you are configuring a Windows server, type the IP address, default gateway address, and
subnet mask in the appropriate spaces.
If you are configuring a client, check with your network administrator to learn whether you
should enable automatic TCP/IP configuration or whether you should type a static IP address,
default gateway address, and subnet mask in the appropriate spaces.
4. Click OK to exit.
5. If prompted, exit Windows and restart your computer for the changes to take effect.
178 Chapter 9 Networking ENWW