HP LaserJet 3055 - Manual (Page 63)

Using the all-in-one volume controls
You can control the volume of the following sounds:
● The alarm sound that the all-in-one emits when it requires attention, such as when the all-in-one
door is open.
● The beeps that are emitted when you press the all-in-one control-panel buttons.
● The phone line sounds for outgoing faxes.
● The ring volume for incoming faxes.
Changing the alarm volume
The alarm sounds when the all-in-one presents an alert or critical error message. The alarm duration
length is one second.
To change the alarm volume
1. Press Menu .
2. Use the < or the > button to select System setup, and then press .
3. Use the < or the > button to select Volume settings, and then press .
4. Press to select Alarm volume.
5. Use the < or the > button to select Off, Soft, Medium, or Loud.
6. Press to save your selection.
NOTE The factory-set default for the alarm volume is Soft.
Changing the volume for the fax
This setting determines the volume of various fax sounds that occur when the all-in-one is sending or
receiving fax jobs.
To change the volume for the fax
1. Press Volume .
2. Use the < or the > button to select Off, Soft, Medium, or Loud.
3. Press to save your selection.
NOTE The factory-set default is Soft.
ENWW Using the all-in-one control panel 45