Changing the sound-volume settings, To change the ring volume – HP LaserJet 3055 User Manual
Page 112
Changing the sound-volume settings
Control the volume of the fax sounds from the control panel. You can make changes to the following
sounds:
●
The fax sounds that are associated with incoming and outgoing faxes
●
The ring for incoming faxes
The factory-set default for the fax-sounds volume is Soft.
To change the fax-sounds (line-monitor) volume (HP LaserJet 3050 all-in-one)
Complete the following steps to change the fax-sound volume on the HP LaserJet 3050 all-in-one.
1.
Press
Menu
.
2.
Use the
<
or the
>
button to select System setup, and then press .
3.
Use the
<
or the
>
button to select Volume settings, and then press .
4.
Use the
<
or the
>
button to select PhoneLine Volume, and then press .
5.
Use the
<
or the
>
button to select Off, Soft, Medium, or Loud.
6.
Press to save your selection.
To change the fax-sounds (line-monitor) volume (HP LaserJet 3055/3390/3392
all-in-one)
Complete the following steps to change the fax-sounds volume on the (HP LaserJet 3055/3390/3392
all-in-one).
1.
Press
Volume
on the control panel.
2.
Use the
<
or the
>
button to select Off, Soft, Medium, or Loud.
3.
Press to save your selection.
To change the ring volume
When the all-in-one is initially receiving a call, a ring alert is audible. The ring duration length is
based on the local telephone company ring-pattern length. The factory-set default for the ring volume
is Soft.
1.
Press
Menu
.
2.
Use the
<
or the
>
button to select System setup, and then press .
3.
Use the
<
or the
>
button to select Volume settings, and then press .
4.
Use the
<
or the
>
button to select Ring volume, and then press .
5.
Use the
<
or the
>
button to select Off, Soft, Medium, or Loud.
6.
Press to save your selection.
94
Chapter 6 Fax
ENWW