HP LaserJet 3055 User Manual
Page 57
CAUTION
To prevent damage to the all-in-one, do not use an original that contains
correction tape, correction fluid, paper clips, or staples. Also, do not load photographs, small
originals, or fragile originals into the ADF.
1.
For the HP LaserJet 3050 all-in-one, insert the top-end of the stack of originals into the ADF
input tray, with the media stack face-down and the first page to be copied at the bottom of the
stack.
Make sure that the ADF media lever is set correctly for single-page or multiple-page documents.
-or-
For the HP LaserJet 3052/3055/3390/3392 all-in-one, insert the top-end of the stack of originals
into the ADF input tray, with the media stack face-up and the first page to be copied on top of
the stack.
2.
Slide the stack into the ADF until it does not move any farther.
HP LaserJet 3052/3055
HP LaserJet 3390/3392
HP LaserJet 3050
Document Loaded appears on the control-panel display.
3.
Adjust the media guides until they are snug against the media.
HP LaserJet
HP LaserJet 3390/3392
3052/3055
HP LaserJet 3050
4.
The document is now ready to be faxed/copied/scanned.
ENWW
Loading media into the input trays
39