Heavy paper, Letterhead and preprinted forms, Heavy paper letterhead and preprinted forms – HP LaserJet 3055 User Manual
Page 224
Heavy paper
●
Any tray will print most heavy media that does not exceed 105 g/m
2
(28 lb bond).
●
Use tray 1 for card stock (135 g/m
2
to 216 g/m
2
; 50 to 80 lb cover).
●
In either the software program or the printer driver, select Heavy (106 g/m
2
to 163 g/m
2
; 28 to
43 lb bond) or Cardstock (135 g/m
2
to 216 g/m
2
; 50 to 80 lb cover) as the media type, or print
from a tray that is configured for heavy paper. Because this setting affects all print jobs, it is
important to return the all-in-one back to its original settings after the job has printed.
CAUTION
Using paper that is heavier than the media specification recommended for this all-
in-one can cause misfeeds, jams, reduced print quality, and excessive mechanical wear.
Some heavier media, such as HP Cover Stock, can be safely used.
Letterhead and preprinted forms
The all-in-one can print on letterhead and preprinted forms that can withstand temperatures of 200°C
(392°F).
NOTE
To print a single-page cover letter on letterhead, followed by a multiple-page
document, feed the letterhead face up in the single-sheet priority input slot (tray 1), and load
the standard paper in the main input tray (tray 2). The all-in-one automatically prints from the
single-sheet priority input slot first.
206
Chapter 11 How do I?
ENWW