HP LaserJet 3055 - Manual (Page 344)

Control panel message Description Recommended action
Make sure that the phone is working by
disconnecting the all-in-one, plugging in a
telephone to the phone line, and making a
voice call.
Turn off error-correction mode (ECM), and
turn off V.34. Ask the sender to resend the
fax. See
Setting the fax-error-correction
mode or Changing the V.34 setting .
Connect the all-in-one to a different phone
line.
If the error persists, contact HP Customer
Care. See
HP Customer Care or the
support flyer that came in the all-in-one box.
Fax Send error An error occurred while trying to send a fax. Try resending the fax.
Try faxing to another fax number.
Check for a dial tone on the phone line by
pressing
Start Fax .
Check that the telephone cord is securely
connected by unplugging and replugging
the cord.
Make sure that you are using the telephone
cord that came with the all-in-one.
Make sure that the phone is working by
disconnecting the all-in-one, plugging in a
telephone to the phone line, and making a
voice call.
Connect the all-in-one to a different phone
line.
Set the fax resolution to Standard instead
of the default of Fine. See
Changing
resolution settings .
If the error persists, contact HP Customer
Care. See
HP Customer Care or the
support flyer that came in the all-in-one box.
Fit to Page on flatbed only The copy reduce/enlarge feature (called
"Fit to Page") applies only to copies made
from the flatbed scanner. Use the flatbed or select another reduction/
enlargement setting.
Group dial not allowed in group The speed-dial code that you typed is
programmed for a group. Adding a group-
dial to another group-dial is not allowed. Add one-touch buttons (programmed as an
individual speed dial) or speed-dial codes
to a group-dial.
Invalid date An invalid date was entered, such as June
35. Re-enter the date.
Invalid driver Press You are using the incorrect printer driver. Select the printer driver that is appropriate
for your all-in-one.
Invalid entry Invalid data or response. Correct the entry.
Table 13-1 Alert and warning messages (continued)
326 Chapter 13 Troubleshooting ENWW