HP LaserJet 3055 - Manual (Page 59)

Loading input trays, HP LaserJet 3390/3392 all-in-one
Single-sheet priority input slot (tray 1)
The single-sheet priority input slot on the HP LaserJet 3390/3392 all-in-one holds one sheet of media
up to 163 g/m
2 (43 lb) in weight or one envelope, transparency, or card. Load media with the top
forward and the side to be printed facing up. To prevent jams and skewing, always adjust the side
media guides before feeding the media.
NOTE When feeding media into the single-sheet priority input slot on the HP LaserJet
3390/3392 all-in-one, the all-in-one pulls the media partially into the all-in-one and then
pauses. You must wait for the all-in-one to stop before feeding another sheet of media. You
can only feed one sheet of media at a time.
250-sheet input tray (tray 2 or optional tray 3)
NOTE Tray 3 is optional for the HP LaserJet 3390 all-in-one.
The input tray holds up to 250 pages of 80 g/m 2 or 20 lb paper or fewer pages of heavier media
(25 mm (0.9 inch) or less stack height). Load media with the top forward and the side to be printed
facing down. To prevent jams and skewing, always adjust the side and rear media guides.
NOTE When you add new media, make sure that you remove all of the media from the input
tray and straighten the stack of new media. This helps to prevent multiple sheets of media
from feeding into the all-in-one, which can cause jams.
ENWW Loading media into the input trays 41