HP LaserJet 3055 - Manual (Page 118)

To send a fax by using HP Director, complete the following steps:
1. Load the document into the automatic document feeder (ADF) input tray or the flatbed scanner.
2. Open HP Director by clicking the icon in the dock and and then click Fax. The Apple print
dialog appears.
3. Select Fax PDF from the PDF pop-up menu.
4. Enter the fax number of one or more recipients under To.
5. Select the all-in-one under Modem.
6. Click Fax.
To send a fax by printing to a fax driver, complete the following steps:
1. Open the document that you want to fax.
2. Click File and then click Print.
3. Select Fax PDF from the PDF pop-up menu.
4. Enter the fax number of one or more recipients under To.
5. Select the all-in-one under Modem.
6. Click Fax.
To send a fax from a third-party software program, such as Microsoft Word (all operating
systems)
1. Open a document in a third-party program.
2. Click the File menu, and then click Print.
3. Select the fax print driver from the printer drop-down list. The fax software appears.
4. Windows users: Complete steps 2 through 5 in the Windows section of Sending and receiving
faxes by using a computer .
-or-
Mac users: Complete steps 2 through 6 in either the Mac OS X V10.3 or the Mac OS X V10.4
section of
Sending and receiving faxes by using a computer .
To receive faxes to your computer
To receive faxes to your computer, you must turn on the receive-to-PC setting in the software (see
the all-in-one software Help). The receive-to-PC setting can be activated only from one computer. If
for any reason that computer is no longer available, you can use the following procedure to turn the
receive-to-PC setting off from the all-in-one control panel.
1. Open HP ToolboxFX.
2. Select the HP LaserJet 3050/3055/3390/3392 all-in-one.
3. Click Fax.
100 Chapter 6 Fax ENWW