Creating an lpr port for an installed all-in-one – HP LaserJet 3055 User Manual
Page 200
7.
Click Yes to keep the existing driver, if prompted. Click Next.
8.
Type an all-in-one name and (if desired) click this all-in-one as default (if desired). Click Next.
9.
Select whether to share this all-in-one with other network computers (for example, if your
system is a printer server). If shared, type a share name to identify the all-in-one to other users.
Click Next.
10.
If desired, enter a location and other information for this all-in-one. Click Next.
11.
Click Yes to print a test page, then click Next.
12.
Click Finish to close the wizard.
Creating an LPR port for an installed all-in-one
1.
Click Start, Printers and Faxes.
2.
Right-click the Printer icon, and select Properties.
3.
Select the Ports tab and Add Port.
4.
Select LPR Port from the Printer Ports dialog box, and select New Port.
5.
In the field labeled Name or address of server providing lpd, enter the DNS name or IP
address of the all-in-one.
6.
In the dialog box labeled Name of all-in-one or print queue on that server, (in lowercase) type
the name of the print queue for the all-in-one (for example:
raw
,
anything
, etc.).
7.
Select OK.
8.
Select Close and OK to close the Properties box.
182
Chapter 9 Networking
ENWW