Print on both sides (macintosh) – HP LaserJet 3055 User Manual
Page 218
Print on both sides (Macintosh)
Automatic two-sided printing (duplexing) is available by using the automatic duplexer on the
HP LaserJet 3390/3392 all-in-one. Manual duplexing is available on the HP LaserJet
3050/3052/3055/3390/3392 all-in-one. To duplex manually, print on both sides of a page by feeding
the page through the all-in-one twice.
To print on both sides automatically (HP LaserJet 3390/3392 all-in-one)
1.
Insert enough paper into one of the trays to accommodate the print job. If you are loading
special paper such as letterhead, load it in one of the following ways:
●
For tray 1, load the letterhead paper with the front side up and the bottom-edge feeding
into the all-in-one first.
●
For all other trays, load the letterhead paper with the front side down and the top edge at
the back of the tray.
CAUTION
Do not load paper that is heavier than 105 g/m
2
(28-lb bond). Jamming might
result.
2.
Open the printer driver (see
Gaining access to the printer drivers
).
3.
Open the Layout pop-up menu.
4.
Next to Two Sided Printing, select either Long-Edge Binding or Short-Edge Binding.
5.
Click Print.
200
Chapter 11 How do I?
ENWW