Scan: how do i, Use hp laserjet scan, Scan from the all-in-one control panel – HP LaserJet 3055 User Manual
Page 252
Scan: How do I?
Use this section to answer scanning questions.
Use HP LaserJet Scan
1.
In the Hewlett-Packard program group, select Scan to start HP LaserJet Scan.
NOTE
Pressing Start Scan on the all-in-one control panel also starts HP LaserJet Scan.
2.
Choose the action that you want to accomplish.
●
Select a destination to begin scanning immediately.
●
Select Scan after prompting me for settings to specify additional settings before you
begin scanning.
●
Select Set up the device to program the Scan To button.
3.
Click OK.
NOTE
OK should indicate the action that you want to accomplish.
Scan from the all-in-one control panel
1.
Load the originals that are to be scanned in the automatic document feeder (ADF) and adjust
the media guides.
OR
Lift the flatbed scanner cover and load the original face-down on the glass, with the upper-left
corner of the document located in the lower-right corner of the glass. Gently close the lid.
2.
Press
Start Scan
or
Scan To
on the control panel.
234
Chapter 11 How do I?
ENWW