Restore the factory-set defaults – HP LaserJet 3055 User Manual
Page 259
To clean the paper path from the all-in-one control panel
If you do not have access to HP ToolboxFX, you can print and use a cleaning page from the all-in-
one control panel.
1.
Press
Menu
.
2.
Use the
<
or the
>
button to find the Service menu.
3.
Press .
4.
Use the
<
or the
>
button to find Cleaning Mode.
5.
Press .
6.
Load plain letter or A4 paper when you are prompted.
7.
Press again to confirm and begin the cleaning process.
A page feeds through the all-in-one slowly. Discard the page when the process is completed.
Restore the factory-set defaults
Restoring the factory-set defaults returns all of the settings to the factory defaults, and it also clears
the fax header name and phone number.
CAUTION
This procedure clears fax numbers and names that are associated with one-touch
keys and speed-dial codes, and deletes any pages that are stored in the memory. The
procedure then automatically restarts the all-in-one.
To restore the factory-set defaults
1.
On the all-in-one control panel, press
Menu
.
2.
Use the
<
or the
>
button to select Service, and then press .
3.
Use the
<
or the
>
button to select Restore defaults, and then press .
The all-in-one automatically restarts.
ENWW
Other: How do I?
241